Polished concrete · Launceston & TasmaniaFloors
that shine.
New builds, homes, garages, sheds and pool surrounds. Ground back to the stone and polished by Josh, start to finish.
- Free on-site quotes
- No coatings to peel
- HEPA dust extraction


What we
polish
If it's a slab, Josh can probably polish it. Inside we go up to a mirror; outside we hone it matte so it stays grippy.

New builds
Living areas, kitchens and hallways, timed to your build so the floor is done before the plasterers and finished after the trades.
Find out more →
Existing homes
Pulling up carpet or tiles? Most slabs under there can be polished. We grind off the glue and tell you honestly what it'll come up like.
Find out more →
Garages & sheds
A polished garage floor is tough, bright and easy to keep clean. Oil, tyre marks and dust wipe straight off.
Find out more →
Pool surrounds & outdoor
Honed concrete around pools, alfresco areas and paths. Matte and grippy, sealed against chlorine and weather.
Find out more →Why polished concrete
Beats the rest.
Your slab is already there. Polishing it turns it into the floor, rather than covering it with something that wears out.
| Feature | Polished concrete | Tiles | Epoxy coating | Carpet |
|---|---|---|---|---|
| No grout lines or joins to clean | ✓ | ✕ | ✓ | ✓ |
| Nothing on top to peel or lift | ✓ | ✓ | ✕ | ✓ |
| Copes with cars, tools and boots | ✓ | ~ | ✓ | ✕ |
| Wipes clean, holds no dust | ✓ | ~ | ✓ | ✕ |
| Uses the slab you've already paid for | ✓ | ✕ | ~ | ✕ |
| Lasts for decades with basic care | ✓ | ✓ | ~ | ✕ |
A general guide. Josh will tell you straight if your slab isn't a good candidate.
Pick your
finish
Two choices make every polished floor: how much stone you see, and how much shine. See the finishes guide
01 · Stone

The top cream is polished, so it reads as smooth grey concrete with no stones showing. Clean and minimal.
Under 1 mm ground off
A light grind opens up the sand and the odd small stone. A fine speckle that hides dust and wear.
About 1–2 mm ground off
We grind deep enough to cut the stones in half, so the whole aggregate shows. The most striking look.
About 3–5 mm ground off02 · Shine

Honed, low sheen. Grippy underfoot. Our pick for pool surrounds and outdoor areas.

A soft glow that catches the light without mirroring it. Easy to live with.

Polished up to a mirror. Windows, lights and cars reflect right back.
Josh's
floors
Full gallery 
























Who does the work
Meet Josh.
Grind to Shine is Josh's business, based in Launceston. He quotes the job, runs the machines and walks you through the finished floor. No sales reps, no subbies you've never met.
That means you get a straight answer about what your slab can do, and the person who promised the finish is the one delivering it.
Good
questions
Is polished concrete slippery?+
Not when it's dry: a polished floor is about as grippy as a sealed timber floor. Wet is a different story, which is why outside and around pools we hone to a matte finish instead of polishing to a gloss.
How long does it take?+
A typical house slab is a few days of grinding and polishing, spread across two visits on a new build (before and after the trades). Garages are usually one to two days. We'll give you a time frame with the quote.
Can you polish my existing floor?+
Usually, yes. Once the carpet or tiles are up we grind off the glue and look at the slab. Old slabs can have patches, cracks or uneven stone, and we'll show you what to expect before you commit.
How much does it cost?+
It depends on the size, how much exposure you want, the sheen and the slab itself. Send a photo and rough size and we'll come back with a ballpark, then a fixed quote after we've seen it.
What areas do you cover?+
Josh is based in Launceston and takes jobs right across Tasmania, from Launceston and the Tamar Valley to Hobart, Devonport and Burnie. Quotes are free. Send a photo and your suburb and he'll tell you when he's next in your area.