Honed, not polished
Honing stops at a lower grit than polishing, leaving a smooth matte surface. You still see the stone, without the slippery shine.
Free quotes across Tasmania · Call Josh on 0418 445 674
Outside, a gloss would be slippery when wet. So around pools and alfresco areas Josh hones the concrete to a matte finish that shows the stone and stays grippy underfoot.

Honing stops at a lower grit than polishing, leaving a smooth matte surface. You still see the stone, without the slippery shine.
A penetrating sealer protects the concrete against chlorine, salt, sun and the Tassie weather.
Pool coping and edges are done by hand so the finish runs right to the waterline.
Every photo is one of Josh's floors. See the full gallery
Not when it's dry: a polished floor is about as grippy as a sealed timber floor. Wet is a different story, which is why outside and around pools we hone to a matte finish instead of polishing to a gloss.
The final guard soaks into the concrete and resists most spills if you wipe them up. Leave red wine, oil or acidic stuff sitting for hours and it can mark, like natural stone.
It depends on the size, how much exposure you want, the sheen and the slab itself. Send a photo and rough size and we'll come back with a ballpark, then a fixed quote after we've seen it.
Free quote
Fill this in or call 0418 445 674. A photo and rough size is all Josh needs for a first number.

Living areas, kitchens and hallways, timed to your build so the floor is done before the plasterers and finished after the trades.
Find out more →
Pulling up carpet or tiles? Most slabs under there can be polished. We grind off the glue and tell you honestly what it'll come up like.
Find out more →
A polished garage floor is tough, bright and easy to keep clean. Oil, tyre marks and dust wipe straight off.
Find out more →